Single acting sealing element comprising a PolyFluor™ U-shaped ring and a metal spring energizer. Two FluoroFlex Piston seals, installed in separate grooves, heel to heel, are required for use on a piston. The FluoroFlex™ seal is resistant to most liquids and chemicals. It is a low friction seal with no stick-slip effect and is wear-resistant. It can be used to seal pistons subject to dynamic and static loads.
FluoroFlex™ seals are available in most PolyFluor™ materials
Operating Ranges:
- Speed: Reciprocating motion up to approximately 49 ft/s (15 m/s)
- Temperature: Approximately -238°F to +440°F (-150°C to +225°C)
- Pressure: Up to 6,500 PSI (45 MPa)
