|
|
 |
| Industrial Elastomer Materials |
|
|
| The following Table includes the standard elastomer materials typically used in industrial and medical applications.
Custom elastomer materials are also available for special operating environments and conditions, please consult with PolyMod® Technologies Inc.’s Technical Service Team. |
|
| Elastomer Material Code |
Polymer |
Reference |
Storage Life* (Years) |
| N1** |
NBR |
Industrial General Purpose, 70A |
15 |
| N2** |
NBR |
Industrial General Purpose, 90A |
15 |
| N5** |
NBR |
Extreme Temperature |
15 |
| E1** |
EPDM |
Industrial General Purpose, 70A |
Unlimited |
| E2** |
EPDM |
Industrial General Purpose, 80A |
Unlimited |
| E4** |
EPDM |
FDA, Sulfur Cure, 70A |
Unlimited |
| E5** |
EPDM |
FDA, Peroxide Cure, 70A |
Unlimited |
| E6** |
EPDM |
FDA/NSF, 70A |
Unlimited |
| F1**+ |
FKM |
General Purpose, 75A |
Unlimited |
| F2**+ |
FKM |
General Purpose, 90A |
Unlimited |
| F7**+ |
FKM |
Chemically Resistant |
Unlimited |
| F8 |
FFKM |
Perfluor, 70A |
Unlimited |
| Q3 |
Q |
Silicone, 70A |
Unlimited |
| X1** |
XNBR |
80A |
15 |
| H1** |
HNBR |
75A |
15 |
| A1** |
FEPM |
80A |
Unlimited |
| A2** |
FEPM |
70A |
Unlimited |
| *Per ANSI/(NFPA) T 3.19.25R1-2001 |
| **Add P following the elastomer designation to denote the PolyMod® low friction version, ex. N3P. |
| +Add U following the elastomer designation to denote UltraMod™ fluoroelastomers, ex. F3U. |
|
|
|
The user is cautioned that PolyMod® Technologies Inc. can accept no liability for the accuracy and applicability of this information.
All statements, technical information, and recommendations are based upon our experiences and knowledge, but in practice unknown parameters and conditions can limit validity of general statements, therefore, PolyMod® Technologies Inc. makes no representations or warranties either expressed or implied based on the contents herein.
|
|
